CRED Acoustic Backscatter Tinian, Commonwealth of Northern Mariana Islands (CNMI) 2003, Imagery Extracted from Gridded Bathymetry

Metadata also available as - [Outline] - [Parseable text] - [XML]

Frequently anticipated questions:


What does this data set describe?

Title:
CRED Acoustic Backscatter Tinian, Commonwealth of Northern Mariana Islands (CNMI) 2003, Imagery Extracted from Gridded Bathymetry
Abstract:
Backscatter extracted from gridded bathymetry of the banktops and shelf environments of the Tinian, of the Commonwealth of Northern Mariana Islands (CNMI).
Supplemental_Information:
Data were collected aboard the R/V AHI (Acoustic Habitat Investigator),a 25' survey launch owned and operated by the NOAA Pacific Islands Fisheries Science Center in Honolulu, HI. The R/V AHI's survey sensors include a 240 kHz RESON 8101-ER sonar providing bathymetry and imagery data, a TSS/Applanix POS/MV Model 320 which measures position, velocity, attitude and heading, and a Seabird SBE 19 CTD used to measure sound velocity profiles.

Equipment serial numbers and software versions are as follows:

RESON 8101-ER multibeam echosounder DOC inventory #: CD0000537418 Firmware, dry: 8101-2.07-2D4D Firmware, wet: 8101-1.06-2F6B

POS/MV Model 320, version 3 DOC inventory #: CD0000476647 PCS serial #: 474 IMU serial #: 203 Controller software: v 1.0.5.0

Seabird SBE19 CTD: Serial #: 3029

R/V AHI Lever Arm Distances and Alignment Offsets The R/V AHI Reference Point (RP) is defined to be the intersection of the vessel's centerline, the cabin deck and the bulkhead immediately aft of the transducer. This is marked by a punch in the deck weld at that location. Positive X means the point is forward of the RP, positive Y means the point is to starboard of the RP, positive Z means the point is below the RP. The loaded waterline is defined as the intersection of the vessel's performance wing with the hull at the transom.

Antenna Baseline Distance, m: 1.229 Transducer depth below waterline, m 0.62

RP to IMU 0.80 0.00 0.08 RP to Primary GPS Antenna -3.55 -0.61 -1.88 RP to Vessel 0.16 0.00 0.77 RP to Sensor 1(MB transducer) 0.16 0.00 0.77 RP to Sensor 2 0 0 0 RP to Aux. GPS Antenna 0 0 0 RP to Heave lever arm(deg) -0.67 0.00 0.00 IMU rotation Ref. Frame, deg 0 0 0 Sensor 1 rotation Ref. Frame, deg 0 0 0 Sensor 2 rotation Ref. Frame, deg 0 0 0

Roll offset: +0.5 deg Pitch offset: 0.0 deg Gyro offset: 0.0 deg

  1. How should this data set be cited?

    Pacific Islands Benthic Habitat Mapping Center (PIBHMC), Coral Reef Ecosystem Division (CRED), Pacific Islands Fisheries Science Center (PIFSC), National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA), 200508, CRED Acoustic Backscatter Tinian, Commonwealth of Northern Mariana Islands (CNMI) 2003, Imagery Extracted from Gridded Bathymetry.

    Online Links:

  2. What geographic area does the data set cover?

    West_Bounding_Coordinate: 145.634128
    East_Bounding_Coordinate: 145.703659
    North_Bounding_Coordinate: 15.155683
    South_Bounding_Coordinate: 14.887760

  3. What does it look like?

  4. Does the data set describe conditions during a particular time period?

    Beginning_Date: 23-Aug-2003
    Ending_Date: 12-Sep-2003
    Currentness_Reference: ground condition

  5. What is the general form of this data set?

    Geospatial_Data_Presentation_Form: raster digital data

  6. How does the data set represent geographic features?

    1. How are geographic features stored in the data set?

      This is a Raster data set. It contains the following raster data types:

      • Dimensions 6520 x 7668 x 1, type Grid Cell

    2. What coordinate system is used to represent geographic features?

      Grid_Coordinate_System_Name: Universal Transverse Mercator
      Universal_Transverse_Mercator:
      UTM_Zone_Number: 55
      Transverse_Mercator:
      Scale_Factor_at_Central_Meridian: 9.9996
      Longitude_of_Central_Meridian: 147
      Latitude_of_Projection_Origin: 0
      False_Easting: 500000
      False_Northing: 0

      Planar coordinates are encoded using Row and Column
      Abscissae (x-coordinates) are specified to the nearest 1
      Ordinates (y-coordinates) are specified to the nearest 1
      Planar coordinates are specified in meters

      The horizontal datum used is D_WGS_1984.
      The ellipsoid used is WGS_1984.
      The semi-major axis of the ellipsoid used is 6378137.000000.
      The flattening of the ellipsoid used is 1/298.257224.

      Vertical_Coordinate_System_Definition:
      Depth_System_Definition:
      Depth_Datum_Name: mean lower low water
      Depth_Resolution: 0.01
      Depth_Distance_Units: meters
      Depth_Encoding_Method: Attribute Values

  7. How does the data set describe geographic features?

    Entity_and_Attribute_Overview:
    Sidescan data within a GSF file are arranged as small sequences of intensity values, one sequence per beam per ping. The intensity values represent the amplitude of echo returns to the sensor and can be related to seabed roughness.
    Entity_and_Attribute_Detail_Citation: none


Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)

  2. Who also contributed to the data set?

    Pacific Islands Benthic Habitat Mapping Center, Coral Reef Ecosystem Division (CRED), Pacific Islands Fisheries Science Center (PIFSC), NOAA

  3. To whom should users address questions about the data?

    Pacific Islands Benthic Habitat Mapping Center (PIBHMC), Coral Reef Ecosystem Division (CRED), Pacific Islands Fisheries Science Center (PIFSC), National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA)
    NOAA IRC
    Honolulu, HI 96818

    808 725-5360 (voice)
    808 725-5429 (FAX)
    nmfs.pic.credinfo@noaa.gov

    Contact_Instructions: e-mail preferred


Why was the data set created?

This acoustic backscatter imagery was created using data gathered from multibeam soundings for use as a planning and reference document. Refer to supplemental information for description of instrument and survey.


How was the data set created?

  1. From what previous works were the data drawn?

  2. How were the data generated, processed, and modified?

    Date: 12-May-2005 (process 1 of 1)
    Science Applications International Corporation's (SAIC) ISS-2000 acquires, processes and records data, provides survey control and underway quality control displays. SAIC's SABER processing software is used to process the raw soundings, analyze the results, manually edit the sounding data to remove outliers and derive average gridded data values. The data have been corrected for observed tides from Guam tide gauge 1630000 with a time corrector of 18 minutes and a tide height multiplier of 0.94 using SABER postprocessing software. The data were also recorrected for observed sound velocities in postprocessing. Hawaii Mapping Research Group (HMRG) processing software was then used to extract values of acoustic intensity from the soundings. HMRG is an organization of scientists, engineers and technicians whose mission is to design, build, and operate tools for mapping the seafloor. HMRG is a group within the School of Ocean and Earth Science and Technology at the University of Hawaii at Manoa. The gsf2mr program (July, 2003) converts the swath bathymetry ping records contained within a GSF (Generic Sensor Format) version 2.02 dataset into mr1file format. This is done as follows: (i) position each beam's bottom detect intensity sample at the across-track location of that beam's bathymetry value; (ii) assuming a flat bottom in the near neighborhood of the beam, compute across-track distances for all of the beam's remaining intensity samples based on their temporal relation to the bottom detect sample and the computed average sound velocity for that beam as derived from its range and travel time; (iii) after all of the intensity samples from all beams of a ping have been located in across-track distance, fill the gaps between them as necessary by interpolation. The conversion described above is necessary in order to run HMRG backscatter processing operations on the data, such as filtering to remove noise, and to create netCDF grids, raster images and geotiffs. GMT was then used to reformat the acoustic imagery when necessary. Interactive Visualization System's Fledermaus, ESRI ArcGIS, and RSI ENVI were used for viewing results and creating browse objects. Software used: SAIC ISS-2000 Acquisition Software, v 3.4 (20030610) SAIC SABER Processing Software, v 2.0.2 (20030610) Hawaii Mapping Research Group (HMRG) Processing Software GMT Generic Mapping Tools, v 3.4.2 (20021002)

  3. What similar or related data should the user be aware of?


How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?

    Data are collected for resource management and research purposes and are tested for internal consistency; however, no effort is made to compare these data to external references or to other published data.

  2. How accurate are the geographic locations?

    Horizontal positioning system: GPS SPS Horizontal position accuracy: 1.0 meters

  3. How accurate are the heights or depths?

    Range resolution of sonar: approximately 1.25 cm Raw sounding resolution: 1 cm Vertical accuracy of gridded product: approximately 1 meter

  4. Where are the gaps in the data? What is missing?

    Complete

  5. How consistent are the relationships among the observations, including topology?

    Unspecified


How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?

Access_Constraints: None
Use_Constraints:
These data are not to be used for navigation purposes. Please acknowledge the NOAA Coral Reef Ecosystem Division, Pacific Islands Fisheries Science Center as the source of this information.

  1. Who distributes the data set? (Distributor 1 of 1)

    Pacific Islands Benthic Habitat Mapping Center (PIBHMC), Coral Reef Ecosystem Division (CRED), Pacific Islands Fisheries Science Center (PIFSC), National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA)
    NOAA IRC
    Honolulu, HI 96818

    808 725-5360 (voice)
    808 725-5429 (FAX)
    nmfs.pic.credinfo@noaa.gov

    Contact_Instructions: e-mail preferred
  2. What's the catalog number I need to order this data set?

    Downloadable Data

  3. What legal disclaimers am I supposed to read?

    These data are not to be used for navigational purposes. NOAA makes no warranty regarding these data, expressed or implied, nor does the fact of distribution constitute such a warranty. NOAA cannot assume liability for any damages caused by any errors or omissions in these data, nor as a result of the failure of these data to function on a particular system.

  4. How can I download or order the data?


Who wrote the metadata?

Dates:
Last modified: 12-Mar-2014
Metadata author:
Pacific Islands Benthic Habitat Mapping Center (PIBHMC), Coral Reef Ecosystem Division (CRED), Pacific Islands Fisheries Science Center (PIFSC), National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA)
Attn: CRED Data Management Team
NOAA IRC
Honolulu, HI 96818

808 725-5360 (voice)
808 725-5429 (FAX)
nmfs.pic.credinfo@noaa.gov

Contact_Instructions: e-mail preferred
Metadata standard:
FGDC Content Standard for Digital Geospatial Metadata (FGDC-STD-001-1998)


Generated by mp version 2.9.13 on Mon Nov 24 10:42:51 2014