Rugosity 10 m grid derived from gridded bathymetry of Maug Island, Commonwealth of the Northern Mariana Islands (CNMI), USA

Metadata also available as - [Outline] - [Parseable text] - [XML]

Frequently anticipated questions:


What does this data set describe?

Title:
Rugosity 10 m grid derived from gridded bathymetry of Maug Island, Commonwealth of the Northern Mariana Islands (CNMI), USA
Abstract:
Rugosity is derived from gridded (10 m cell size) multibeam bathymetry, collected aboard NOAA Ship Hiialaka'i and R/V AHI, using the Benthic Terrain Modeler with rugosity methods by Jeff Jenness (2003). Cell values reflect the surface area to planimetric area ratio for the area contained within that cell's neighborhood. They provide indices of topographic roughness & convolutedness. This data set is for the shelf environment of Maug Island.
Supplemental_Information:
Gridded multibeam data were collected aboard the Hi'ialakai, a 218' United States National Oceanographic and Atmospheric Administration (NOAA) research ship, and aboard the R/V AHI (Acoustic Habitat Investigator), a 25' survey launch owned and operated by the NOAA Pacific Islands Fisheries Science Center in Honolulu, HI. The metadata for the bathymetry is documented in the product metadata, maug_10m.txt. (<http://www.soest.hawaii.edu/pibhmc/pibhmc_cnmi_bathy.htm>) References: Jenness, J. 2003. Grid surface areas: Surface area and ratios from elevation grids [Electronic manual]. Jenness Enterprises: ArcView Extensions. <http://www.jennessent.com/arcview/arcview_extensions.htm> Lundblad et al., 2006, A benthic terrain classification scheme for American Samoa, Marine Geodesy, 29(2):89 - 111. <http://www.csc.noaa.gov/products/btm/>

CNMI and Guam rugosity maps are all symbolized with the same stretched color ramp (1.5 standard deviations) in order to provide a standard for qualitative comparisons between islands. Each island has a unique maximum value for rugosity causing the distribution of values across the color ramp to vary slightly. It is recommended that the actual data set be used for integrated analysis in order to make quantitative observations. The values for this data set range from 1.000 to 5.763 with a mean of 1.101 and a standard deviation of 0.169.

The terrestrial elevation data shown in the map for this data set are SRTM Finished 3 arc sec Shaded Relief. They were collected during NASA's Shuttle Radar Topograph Mission (SRTM). For more information on the mission, go to: <http://www2.jpl.nasa.gov/srtm/faq.html#data>. The data are available from the United States Geological Survey (USGS) as reformatted elevation data that are consistent with other Digital Elevation Models.

  1. How should this data set be cited?

    Pacific Islands Benthic Habitat Mapping Center (PIBHMC), Coral Reef Ecosystem Division (CRED), Pacific Islands Fisheries Science Center (PIFSC), National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA), 20081022, Rugosity 10 m grid derived from gridded bathymetry of Maug Island, Commonwealth of the Northern Mariana Islands (CNMI), USA.

    Online Links:

  2. What geographic area does the data set cover?

    West_Bounding_Coordinate: 145.186
    East_Bounding_Coordinate: 145.264
    North_Bounding_Coordinate: 20.068
    South_Bounding_Coordinate: 19.989

  3. What does it look like?

    <http://www.soest.hawaii.edu/pibhmc/CNMI_images/maug_10m_rugosity_445.jpg> (JPEG)
    Gridded Bathymetry

  4. Does the data set describe conditions during a particular time period?

    Beginning_Date: 25-May-2007
    Ending_Date: 08-Jun-2007
    Currentness_Reference: ground condition

  5. What is the general form of this data set?

    Geospatial_Data_Presentation_Form: raster digital data

  6. How does the data set represent geographic features?

    1. How are geographic features stored in the data set?

      This is a Raster data set. It contains the following raster data types:

      • Dimensions 801 x 867 x 1, type Grid Cell

    2. What coordinate system is used to represent geographic features?

      Grid_Coordinate_System_Name: Universal Transverse Mercator
      Universal_Transverse_Mercator:
      UTM_Zone_Number: 55
      Transverse_Mercator:
      Scale_Factor_at_Central_Meridian: 0.9996
      Longitude_of_Central_Meridian: 147
      Latitude_of_Projection_Origin: 0
      False_Easting: 500000
      False_Northing: 0

      Planar coordinates are encoded using Row and Column
      Abscissae (x-coordinates) are specified to the nearest 10
      Ordinates (y-coordinates) are specified to the nearest 10
      Planar coordinates are specified in meters

      The horizontal datum used is D_WGS_1984.
      The ellipsoid used is WGS_1984.
      The semi-major axis of the ellipsoid used is 6378137.000000.
      The flattening of the ellipsoid used is 1/298.257224.

  7. How does the data set describe geographic features?


Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)

  2. Who also contributed to the data set?

    NOAA PIFSC CRED PIBHMC and JIMAR

  3. To whom should users address questions about the data?

    Pacific Islands Benthic Habitat Mapping Center (PIBHMC), Coral Reef Ecosystem Division (CRED), Pacific Islands Fisheries Science Center (PIFSC), National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA)
    Attn: Dr. John Rooney
    NOAA IRC
    Honolulu, HI 96818

    808 725-5360 (voice)
    808 725-5429 (FAX)
    nmfs.pic.credinfo@noaa.gov

    Contact_Instructions: e-mail preferred


Why was the data set created?

The data were derived in support of NOAA Coral Reef Conservation Program goals. Goal 1 is to map all U.S. Coral Reef Ecosystems. This data set specifically addresses Objective 1 and 4: to develop high-resolution benthic maps and to characterize priority deep water reefs and associated habitats. This derivative of bathymetry provides a GIS layer that may be used for benthic and essential fish habitat characterization, and for the study of geologic features. By combining the dataset with bathymetry, backscatter, other derivatives, and in situ data, they collectively compose benthic habitat maps which are designed to be used to understand and predict moderate depth (~10m to 800m) benthic habitats for organisms that inhabit coral reef ecosystems.


How was the data set created?

  1. From what previous works were the data drawn?

  2. How were the data generated, processed, and modified?

    Date: 18-Oct-2008 (process 1 of 1)
    Rugosity was derived from the gridded multibeam bathymetry (maug_10m) using the Benthic Terrain Modeler (BTM). The BTM may be downloaded from <http://www.csc.noaa.gov/products/btm/>. The BTM, written for ArcGIS 8.x or 9.x, includes a component for deriving rugosity using methods by Jeff Jenness as he wrote for ArcView 3.x.

  3. What similar or related data should the user be aware of?


How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?

    Data are collected for resource management and research purposes and are tested for internal consistency; however, no effort is made to compare these data to external references or to other published data.

  2. How accurate are the geographic locations?

    Horizontal positioning system: GPS C/A Horizontal position accuracy: 25 meters

  3. How accurate are the heights or depths?

    Range resolution of sonar: varies with depth Raw sounding resolution: varies with depth Vertical accuracy of gridded product ~ 1% of water depth

  4. Where are the gaps in the data? What is missing?

    Complete

  5. How consistent are the relationships among the observations, including topology?

    These data are believed to be logically consistent though no tests were performed


How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?

Access_Constraints: None
Use_Constraints:
These data are not to be used for navigation purposes. Please acknowledge NOAA Pacific Islands Fisheries Science Center, and the Joint Institute for Marine and Atmospheric Research (JIMAR) University of Hawaii as the sources of this information.

  1. Who distributes the data set? (Distributor 1 of 1)

    Pacific Islands Benthic Habitat Mapping Center (PIBHMC), Coral Reef Ecosystem Division (CRED), Pacific Islands Fisheries Science Center (PIFSC), National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA)
    NOAA IRC
    Honolulu, HI 96818

    808 725-5360 (voice)
    808 725-5429 (FAX)
    nmfs.pic.credinfo@noaa.gov

    Contact_Instructions: e-mail preferred
  2. What's the catalog number I need to order this data set?

    Downloadable Data

  3. What legal disclaimers am I supposed to read?

    These data are not to be used for navigational purposes. NOAA makes no warranty regarding these data, expressed or implied, nor does the fact of distribution constitute such a warranty. NOAA cannot assume liability for any damages caused by any errors or omissions in these data, nor as a result of the failure of these data to function on a particular system.

  4. How can I download or order the data?


Who wrote the metadata?

Dates:
Last modified: 12-Mar-2014
Last Reviewed: 17-Sep-2009
Metadata author:
Pacific Islands Benthic Habitat Mapping Center (PIBHMC), Coral Reef Ecosystem Division (CRED), Pacific Islands Fisheries Science Center (PIFSC), National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA)
NOAA IRC
Honolulu, HI 96818

808 725-5360 (voice)
808 725-5429 (FAX)
nmfs.pic.credinfo@noaa.gov

Contact_Instructions: e-mail preferred
Metadata standard:
FGDC Content Standards for Digital Geospatial Metadata (FGDC-STD-001-1998)


Generated by mp version 2.9.13 on Sat Oct 25 10:43:35 2014