NOAA TIFF Image - 3m Backscatter Mosaic, Florida Deep Coral Areas (Miami) - Lost Coast Explorer - (2010), UTM 17N NAD83

Metadata also available as - [Outline] - [Parseable text] - [XML]

Frequently anticipated questions:


What does this data set describe?

Title:
NOAA TIFF Image - 3m Backscatter Mosaic, Florida Deep Coral Areas (Miami) - Lost Coast Explorer - (2010), UTM 17N NAD83
Abstract:
This dataset contains a unified GeoTiff with 3x3 meter cell size representing the backscatter (intensity) of several deep coral priority areas off the Atlantic Coast of Florida, derived from data collected from the Lost Coast Explorer in October 2010. NOAA's NOS/NCCOS/CCMA Biogeography Branch, in collaboration with NOAA vessel Ron Brown, as well as federal, university, and private sector partners, acquired multibeam bathymetry data off the Atlantic Coast of Florida from 10/26/2010 to 10/27/2010. Data was acquired with a hull-mounted Kongsberg EM 710 multibeam echosounder (70 kHz). It was processed by a NOAA contractor using CARIS HIPS software. Attitude and sound velocity correctors applied to the data. Verified tides were not applied to the data, leaving the depth values referenced to the ellipsoid. The imagery is projected in the UTM Zone 17 north, NAD83 datum. The backscatter component of the bathymetry data were geometrically and radiometrically corrected using Geocoder 3.x software. Acoustic backscatter mosaics are ostensibly an important piece of information when characterizing surficial seafloor features and delineating benthic habitats.
  1. How should this data set be cited?

    Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), National Centers for Coastal Ocean Science (NCCOS), Center for Coastal Monitoring and Assessment (CCMA), Biogeography Branch, 2010, NOAA TIFF Image - 3m Backscatter Mosaic, Florida Deep Coral Areas (Miami) - Lost Coast Explorer - (2010), UTM 17N NAD83: NOAA's Ocean Service, National Centers for Coastal Ocean Science (NCCOS), Silver Spring, MD.

    Online Links:

  2. What geographic area does the data set cover?

    West_Bounding_Coordinate: -79.953092
    East_Bounding_Coordinate: -79.753988
    North_Bounding_Coordinate: 26.415921
    South_Bounding_Coordinate: 25.514811

  3. What does it look like?

  4. Does the data set describe conditions during a particular time period?

    Beginning_Date: 26-Oct-2010
    Ending_Date: 27-Oct-2010
    Currentness_Reference: ground condition

  5. What is the general form of this data set?

    Geospatial_Data_Presentation_Form: raster digital data

  6. How does the data set represent geographic features?

    1. How are geographic features stored in the data set?

      This is a Raster data set. It contains the following raster data types:

      • Dimensions 33215 x 6354 x 1, type Grid Cell

    2. What coordinate system is used to represent geographic features?

      Grid_Coordinate_System_Name: Universal Transverse Mercator
      Universal_Transverse_Mercator:
      UTM_Zone_Number: 17
      Transverse_Mercator:
      Scale_Factor_at_Central_Meridian: 1
      Longitude_of_Central_Meridian: -81
      Latitude_of_Projection_Origin: 0
      False_Easting: 500000
      False_Northing: 0

      Planar coordinates are encoded using Row and Column
      Abscissae (x-coordinates) are specified to the nearest 3.000000
      Ordinates (y-coordinates) are specified to the nearest 3.000000
      Planar coordinates are specified in meters

      The horizontal datum used is North American Datum of 1983.
      The ellipsoid used is Geodetic Reference System 80.
      The semi-major axis of the ellipsoid used is 6378137.0000.
      The flattening of the ellipsoid used is 1/298.257222.

      Vertical_Coordinate_System_Definition:
      Depth_System_Definition:
      Depth_Datum_Name: None
      Depth_Resolution: 0.000001
      Depth_Distance_Units: meters
      Depth_Encoding_Method: Explicit Depth Coordinate Included with Horizontal Coordinates

  7. How does the data set describe geographic features?


Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)

  2. Who also contributed to the data set?

    Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), National Centers for Coastal Ocean Science (NCCOS), Center for Coastal Monitoring and Assessment (CCMA), Biogeography Branch

  3. To whom should users address questions about the data?

    Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), National Centers for Coastal Ocean Science (NCCOS), Center for Coastal Monitoring and Assessment (CCMA), Biogeography Branch
    Project Manager - Deep Coral Project
    1305 East West Highway, SSMC4, N/SCI 1
    Silver Spring, MD 20910
    USA

    (301) 713-3028 (voice)
    (301) 713-4384 (FAX)

    Contact_Instructions:
    Contact info is for CCMA general reception. Please ask for current Biogeography Branch project manager for the Deep Coral Project.


Why was the data set created?

This multibeam data was collected as part of a mulitagency cooperative deep-sea coral investigation aboard the Lost Coast Explorer. The multibeam component of the cruise was intended to both provide fine scale acoustic imagery of known deep coral sites, as well as serve as an exploratory tool for identifying potential new habitat areas.


How was the data set created?

  1. From what previous works were the data drawn?

    Raw Multibeam Data (source 1 of 4)
    Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), National Centers for Coastal Ocean Science (NCCOS), Center for Coastal Monitoring and Assessment (CCMA), Biogeography Branch, Unpublished material, Raw Multibeam Data.

    Type_of_Source_Media: external hard drive
    Source_Contribution: Original raw full resolution dataset.

    HDCS Processed Multibeam Data (source 2 of 4)
    Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), National Centers for Coastal Ocean Science (NCCOS), Center for Coastal Monitoring and Assessment (CCMA), Biogeography Branch, Unpublished material, HDCS Processed Multibeam Data.

    Type_of_Source_Media: external hard drive
    Source_Contribution:
    Processed, cleaned, and corrected full resolution dataset. Sourced from raw .ALL data.

    BASE Surface (source 3 of 4)
    Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), National Centers for Coastal Ocean Science (NCCOS), Center for Coastal Monitoring and Assessment (CCMA), Biogeography Branch, Unpublished material, CARIS BASE Surface.

    Type_of_Source_Media: external hard drive
    Source_Contribution:
    Downsampled CARIS BASE (Bathymetry Associated with Statistical Error) grid with best depth layer. Sourced from processed HDCS data.

    unpublished backscatter (source 4 of 4)
    Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), National Centers for Coastal Ocean Science (NCCOS), Center for Coastal Monitoring and Assessment (CCMA), Biogeography Branch, Unpublished material, mia_bs_3m.tif.

    Type_of_Source_Media: external hard drive
    Source_Contribution: unpublished backscatter

  2. How were the data generated, processed, and modified?

    Date: 2011 (process 1 of 3)
    For this project, data was collected aboard the Lost Coast Explorer from 10/26/2010 to 10/27/2010. Multibeam data were acquired in .all format with a hull-mounted Kongsberg EM 710 ER multibeam echosounder (70 kHz). Backscatter snippet collection was enabled. Line spacing for acquisition was three times the water depth, and data was retained out to 60 degrees from nadir. Heave, roll, pitch and heading correctors were collected using an Applanix POS/MV Model 320 V4 inertial measurement unit (IMU) and associated Trimble GPS antennas. Sound velocity profiles were acquired with a Seabird Electronics SeaCat SBE19P CTD profiler and processed using NOAA's Velocwin V8.85 software, then applied directly to the raw data. Positioning was obtained using Trimble Zephyr GPS receivers.

    Date: 2011 (process 2 of 3)
    Raw .all data were converted and processed using CARIS HIPS & Sips 7.0 software, resulting in a CARIS HDCS format dataset with all correctors applied. Attitude and SWMB data was cleaned of fliers, and SWMB data was reviewed in subset mode by a NOAA contractor.

    Data sources used in this process:

    • Raw Multibeam Data

    Date: 2011 (process 3 of 3)
    Acoustic backscatter mosaics are ostensibly an important piece of information when characterizing surficial seafloor features and delineating benthic habitats. The multibeam backscatter data were corrected for geometric and radiometric distortions using Geocoder 3.x. In particular, the following corrections were applied where appropriate and when artifacts were evident: AVG Trend, TX Power and RX Gain, Area Correction, Spreading, Slant-Range and Extracted Beam Pattern. As no theoretical beam pattern for the Kongsberg Em710 system exists, it was extracted from a mapped area that was flat and had a relatively uniform (sandy) substrate. Individual lines were also truncated based on ping number and/or angle of incidence where appropriate. The final mosaics were exported as geotiffs, ASCII and XYB files (i.e., X,Y locations in NAD 1983 UTM Zone 17N and Backscatter values as measured in decibels dBs).

    Data sources used in this process:

    • unpublished backscatter

  3. What similar or related data should the user be aware of?


How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?

  2. How accurate are the geographic locations?

  3. How accurate are the heights or depths?

  4. Where are the gaps in the data? What is missing?

    This GeoTiff is sourced from a CARIS gridded dataset. The original full-resolution multibeam data was used to create a downsampled uniform-resolution CARIS BASE (Bathymetry Associated with Statistical Error) surface grid with a best depth component. The downsampled grid nodes from that depth surface were then exported and used to generate the ESRI Grid. Some positional shifts may have occurred between the original data points and the transformed grid.

  5. How consistent are the relationships among the observations, including topology?

    Even though the survey was conducted to meet IHO standards, all users should independently analyze the dataset according to their own needs and standards to determine data usability.


How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?

Access_Constraints: Please cite any use of this data.
Use_Constraints:
Note: NOT TO BE USED FOR NAVIGATION. These data were prepared by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, make any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed in this report, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. Any views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. Although all data have been used by NOAA, no warranty, expressed or implied, is made by NOAA as to the accuracy of the data and/or related materials. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by NOAA in the use of these data or related materials.

  1. Who distributes the data set? (Distributor 1 of 1)

    Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), National Centers for Coastal Ocean Science (NCCOS), Center for Coastal Monitoring and Assessment (CCMA), Biogeography Branch
    Project Manager - Deep Coral Project
    1305 East West Highway, SSMC4, N/SCI 1
    Silver Spring, MD 20910
    USA

    (301) 713-3028 (voice)
    (301) 713-4384 (FAX)

    Contact_Instructions:
    Contact info is for CCMA general reception. Please ask for current Biogeography Branch project manager for the Deep Coral Project.
  2. What's the catalog number I need to order this data set?

    Downloadable Data

  3. What legal disclaimers am I supposed to read?

    These data were prepared by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, make any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed in this report, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. Any views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. Although all data have been used by NOAA, no warranty, expressed or implied, is made by NOAA as to the accuracy of the data and/or related materials. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by NOAA in the use of these data or related materials.

  4. How can I download or order the data?


Who wrote the metadata?

Dates:
Last modified: 20-Dec-2012
Last Reviewed: 08-Nov-2011
Metadata author:
Will Sautter
NOAA/NOS/NCCOS/CCMA Biogeography Branch
Acoustic Mapping Specialist
1305 East West Highway, SSMC4
Silver Spring, MD 20910
USA

(301) 713-3028 (voice)
(301) 713-4384 (FAX)

Metadata standard:
FGDC Content Standard for Digital Geospatial Metadata (FGDC-STD-001-1998)


Generated by mp version 2.9.13 on Thu Jul 31 10:41:06 2014