Identification_Information: Citation: Citation_Information: Originator: Pacific Islands Benthic Habitat Mapping Center (PIBHMC), Coral Reef Ecosystem Division (CRED), Pacific Islands Fisheries Science Center (PIFSC), National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA) Publication_Date: 20111012 Title: Derived bathymetry of nearshore benthic habitats near Kaanapali, Maui, Hawaii Online_Linkage: http://www.soest.hawaii.edu/pibhmc/cms/data-by-location/main-hawaiian-islands/maui/bathymetry/ Description: Abstract: Methods used were adapted from a "cookbook" of instructions developed by Kyle Hogref for using IKONOS imagery data to derive seafloor elevations in optically clear water. This dataset was derived from high-resolution (2 m) imagery from DigitalGlobe's WorldView-2 sensor of the Kaanapali area of Maui, Hawaii. Sensor bands 1,2 and 5 (coastal, blue and near IR respectively) were used to derive depth information. The method assumes uniform water clarity but deviations from that condition made extraction difficult in water greater than 30 m depth in the Kaanapali scene used. Results show that biotic material or sediment in the water column skewed results shallower if the material has a high albedo and deeper if the material has a low albedo. Nearshore areas were significantly less impacted in the Kaanapali area, due to the geomorphology of the area and the hi resolution and quality of the imagery, allowing visual descrimination of apparent sediment in the water column. For presentation purposes the map product shows an Inverse Distance Weighted interpolated bathymetry surface, restricted to data within 600 m of the shoreline. Purpose: DG WorldView-2 data are used as the base imagery to derived pseudobathymetry of the Kaanapali area of Maui. This area has both SHOALS and multi-beam acoustic derived bathymetry coverage and will provide an example case of the strengths and weaknesses of pseudobathymetry extraction from high resolution satellite imagery methods. Supplemental_Information: LiDAR bathymetry of Kaanapali, Maui from Scanning Hydrographic Airborne Operational LiDAR data from the United States Army Corps of Engineers Joint Airborne LiDAR Bathymertry Technical Center for Expertise. Multibeam sonar data from the Main Hawaiian Islands Bathymetry synthesis maintained by the Hawaii Mapping Research Group at the University of Hawaii, School of Ocean and Earth Science and Technology. Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 20100406 Ending_Date: 20100406 Currentness_Reference: ground condition Status: Progress: Complete Maintenance_and_Update_Frequency: As needed Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -156.7760 East_Bounding_Coordinate: -156.6470 North_Bounding_Coordinate: 20.9839 South_Bounding_Coordinate: 20.8357 Keywords: Theme: Theme_Keyword_Thesaurus: NCEI Geoportal Filter Theme_Keyword: CoRIS_Metadata Theme: Theme_Keyword_Thesaurus: CRCP Project Theme_Keyword: M218 Benthic Habitat Mapping and Characterization in the Pacific Islands Region Theme_Keyword: 1217 Theme: Theme_Keyword_Thesaurus: CoRIS Theme Thesaurus Theme_Keyword: EARTH SCIENCE > Oceans > Bathymetry/Seafloor Topography > Bathymetry Theme: Theme_Keyword_Thesaurus: None Theme_Keyword: Bathymetry Theme_Keyword: Multibeam sonar Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Category Theme_Keyword: elevation Theme_Keyword: 006 Theme: Theme_Keyword_Thesaurus: CoRIS Discovery Thesaurus Theme_Keyword: Geographic Information > Bathymetry Place: Place_Keyword_Thesaurus: None Place_Keyword: Maui Place_Keyword: Main Hawaiian Islands Place_Keyword: United States of America Place: Place_Keyword_Thesaurus: CoRIS Place Thesaurus Place_Keyword: OCEAN BASIN > Pacific Ocean > Central Pacific Ocean > Hawaiian Islands > Maui Island > Maui Island (20N156W0004) Place_Keyword: COUNTRY/TERRITORY > United States of America > Hawaii > Maui > Maui Island (20N156W0004) Place: Place_Keyword_Thesaurus: CoRIS Region Place_Keyword: MHI Access_Constraints: none Use_Constraints: These data are not to be used for navigation purposes. Please acknowledge the NOAA Pacific Islands Fisheries Science Center, and the Joint Institute for Marine and Atmospheric Research (JIMAR) and Hawaii Mapping Research Group (HMRG) at the University of Hawaii as the sources of this information. Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: Pacific Islands Benthic Habitat Mapping Center (PIBHMC), Coral Reef Ecosystem Division (CRED), Pacific Islands Fisheries Science Center (PIFSC), National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA) Contact_Address: Address_Type: mailing and physical address Address: NOAA IRC Address: NMFS/PIFSC/CRED Address: 1845 WASP Blvd., Building 176 City: Honolulu State_or_Province: HI Postal_Code: 96818 Contact_Voice_Telephone: 808 725-5360 Contact_Facsimile_Telephone: 808 725-5429 Contact_Electronic_Mail_Address: nmfs.pic.credinfo@noaa.gov Contact_Instructions: e-mail preferred Browse_Graphic: Browse_Graphic_File_Name: http://www.soest.hawaii.edu/pibhmc/MHI_images/KaanapaliDerivedBathy_445.jpg Browse_Graphic_File_Description: Layout of data on original satellite imagery Browse_Graphic_File_Type: JPEG Data_Set_Credit: PIBHMC, CRED, PIFSC, NOAA, JIMAR and HMRG Security_Information: Security_Classification_System: Not applicable Security_Classification: Unclassified Security_Handling_Description: Not applicable Native_Data_Set_Environment: netCDF file created using the Generic Mapping Tools (GMT) and ArcGIS ASCII file, both created in a LINUX environment Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: Data are collected for resource management and research purposes and are examined for internal consistency; however, no effort is made to compare these data to external references or to other published data. Logical_Consistency_Report: These data are believed to be logically consistent though no tests were performed Completeness_Report: Complete Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: Horizontal positioning system: GPS (SPS) Horizontal position accuracy: 25 m Vertical_Positional_Accuracy: Vertical_Positional_Accuracy_Report: 1 m Raw sounding resolution: Variable Lineage: Process_Step: Process_Description: Multiple tools in ENVI 4.8 were used to complete the following processing steps: Data conversion from digital number to radiance, correction for atmosphere and water surface reflection, linearization of spectral decay as function of depth, masking of non-applicable values, and bathymetric derivation using variables from multiple linear regression analysis. Multiple tools in ArcGIS 10.0 were used for dataset integration and to extract values for the multiple linear regression analysis and subsequent error analyses. The statisitcs program Matlab was used for the multiple linear regression analysis to provide original variables for depth derivation. The multivariate slope intercept formula used to derive depth was D = a + (bi)(xi) + (bj)(xj) Where: D = depth a = intercept b = slope x = the linearized spectral value resulted in 7.8491 - 2.8696(b1) + 7.9593(b2) b1 is the output masked linearized pictral value of each pixel of Coastal band b2 is the output masked linearized pictral value of each pixel of Blue band More information on this integration process is provided in the product error analysis, availble from PIBHMC upon request. This mosaiced derived bathymetry product (JohDBall3) was then integrated with the multibeam sonar data, with sonar data prioritized over derived data, to create the final product (JohDB3MB). A detailed description of all processing steps is available at: ftp://ftp.soest.hawaii.edu/pibhmc/website/webdocs/documentation/Cookbook_042108.pdf An error analysis of each derived bathymetry grid used is available from PIBHMC upon request. To produce the interpolated surface shown in the map, the floating point grid was converted to a point shapefile in Arc GIS 9.3 using the 'float to raster' and 'raster to point' tools in the Arc Toolbox. A buffer of 600m from the shoreline was created and the derived bathymetry points were clipped to exclude data outside this buffer. This distance was chosen to exclude areas of deeper water that were erroneously returning shallow depth values, due to characteristics of the water column. An Inverse Distance Weighted interpolation was run using 3D Analyst, to produce an interpolated surface, with a grid cell size of 10 m, a variable search radius with a maximum distance of 60 m, and using the coastline as a barrier. All other settings used were default. The interpolated surface was clipped using the coastline and a small number of isolated cells were manually deleted. Process_Date: 20111012 Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Raster Raster_Object_Information: Raster_Object_Type: Grid Cell Row_Count: 5445 Column_Count: 5920 Vertical_Count: 1 Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Planar: Grid_Coordinate_System: Grid_Coordinate_System_Name: Universal Transverse Mercator Universal_Transverse_Mercator: UTM_Zone_Number: 4 Transverse_Mercator: Scale_Factor_at_Central_Meridian: 0.9996 Longitude_of_Central_Meridian: -159 Latitude_of_Projection_Origin: 0.0 False_Easting: 500000 False_Northing: 0.0 Planar_Coordinate_Information: Planar_Coordinate_Encoding_Method: Row and Column Coordinate_Representation: Abscissa_Resolution: 5 Ordinate_Resolution: 5 Planar_Distance_Units: meters Geodetic_Model: Horizontal_Datum_Name: D_WGS_1984 Ellipsoid_Name: WGS_1984 Semi-major_Axis: 6378137.000000 Denominator_of_Flattening_Ratio: 298.257224 Vertical_Coordinate_System_Definition: Depth_System_Definition: Depth_Datum_Name: mean lower low water Depth_Resolution: 0.01 Depth_Distance_Units: meters Depth_Encoding_Method: Attribute Values Entity_and_Attribute_Information: Overview_Description: Entity_and_Attribute_Overview: Depth values are real values based on the average of the soundings that fell within the extracted grid cells. The number of soundings per grid cell range from >1000 soundings in shallow depths to as few as 20 soundings in deeper areas. A total error budget for these data have not been developed. Therefore, the accuracy of depth measurements should be considered to be within 1 meter. Entity_and_Attribute_Detail_Citation: none Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: Pacific Islands Benthic Habitat Mapping Center (PIBHMC), Coral Reef Ecosystem Division (CRED), Pacific Islands Fisheries Science Center (PIFSC), National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA) Contact_Address: Address_Type: mailing and physical address Address: NOAA IRC Address: NMFS/PIFSC/CRED Address: 1845 WASP Blvd., Building 176 City: Honolulu State_or_Province: HI Postal_Code: 96818 Contact_Voice_Telephone: 808 725-5360 Contact_Facsimile_Telephone: 808 725-5429 Contact_Electronic_Mail_Address: nmfs.pic.credinfo@noaa.gov Contact_Instructions: e-mail preferred Resource_Description: Downloadable Data Distribution_Liability: These data are not to be used for navigational purposes. NOAA makes no warranty regarding these data, expressed or implied, nor does the fact of distribution constitute such a warranty. NOAA cannot assume liability for any damages caused by any errors or omissions in these data, nor as a result of the failure of these data to function on a particular system. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: netCDF or Arc ASCII Format_Information_Content: These data can be downloaded as either a 2-D binary netCDF raster grid or an ArcGIS ASCII text file. The netCDF grid is the default grid file format used by GMT (Generic Mapping Tools), which created this file. More information can be located at http://www.soest.hawaii.edu/gmt/and http://www.unidata.ucar.edu/software/netcdf/. The Arc ASCII file, for use in ESRI's (http://www.esri.com) GIS software, can be converted to an Arc Raster Grid using ArcToolbox ASCII to Raster conversion tool. Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: ftp://ftp.soest.hawaii.edu/pibhmc/website/data/mhi/bathymetry/DD2_Depth2_filtermin4x4_10m.zip Fees: None Metadata_Reference_Information: Metadata_Date: 20190605 Metadata_Review_Date: 20111025 Metadata_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: Pacific Islands Benthic Habitat Mapping Center (PIBHMC), Coral Reef Ecosystem Division (CRED), Pacific Islands Fisheries Science Center (PIFSC), National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA) Contact_Address: Address_Type: mailing and physical address Address: NOAA IRC Address: NMFS/PIFSC/CRED Address: 1845 WASP Blvd., Building 176 City: Honolulu State_or_Province: HI Postal_Code: 96818 Contact_Voice_Telephone: 808 725-5360 Contact_Facsimile_Telephone: 808 725-5429 Contact_Electronic_Mail_Address: nmfs.pic.credinfo@noaa.gov Contact_Instructions: e-mail preferred Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998 Metadata_Time_Convention: Universal Time Metadata_Access_Constraints: None Metadata_Use_Constraints: None CoRIS: CoRIS_ID: 20111019020735 CoRIS_Children: None CoRIS_Beginning_Date: 20100406 CoRIS_Ending_Date: 20100406 CoRIS_Metadata_Link: https://www.coris.noaa.gov/metadata/records/html/dd2_depth2_filtermin4x4_10m.html CoRIS_Tracking_ID: 6379