Preliminary hard and soft bottom seafloor substrate map derived from an unsupervised classification of gridded backscatter and bathymetry derivatives at Tinian Island, Commonwealth of the Northern Mariana Islands (CNMI).

Metadata also available as - [Outline] - [Parseable text] - [XML]

Frequently anticipated questions:


What does this data set describe?

Title:
Preliminary hard and soft bottom seafloor substrate map derived from an unsupervised classification of gridded backscatter and bathymetry derivatives at Tinian Island, Commonwealth of the Northern Mariana Islands (CNMI).
Abstract:
Preliminary hard and soft seafloor substrate map derived from an unsupervised classification of multibeam backscatter and bathymety derivatives at Tinian Islands and Tatsumi Bank, CNMI. The dataset was derived using Reson 8101 backscatter data, bathymetric variance and bathymetric rugosity. The sonar frequency is 240 kHz for the Reson 8101 backscatter data, which were resampled to a 5 m grid cell size prior to the classification. Limited seafloor photographs for groundtruthing are available for Tinian and therefore no supervised classification was performed and we are unable to visually or quantitatively evaluate the accuracy of the unsupervised classification seafloor substrate map in a robust manner. However, in locations such French Frigate Shoals, NWHI and Tutuila, American Samoa, ground truth data are available and the unsupervised classification method is a good predictor of substrate type in similar depth ranges and seafloor environments.
Supplemental_Information:
Multibeam bathymetry and backscatter data were collected aboard the R/V AHI (Acoustic Habitat Investigator). See the metadata for that dataset served separately at www.soest.hawaii.edu/pibhmc. The batymetric rugosity dataset is also served separately at the same website. The bathymetric variance grids were generated for use in the classification process and are not served separately. See the process description portion of this document for additional information about how the variance and unsupervised layers were derived.
  1. How might this data set be cited?
    Pacific Islands Benthic Habitat Mapping Center (PIBHMC), Coral Reef Ecosystem Division (CRED), Pacific Islands Fisheries Science Center (PIFSC), National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA), 20081010, Preliminary hard and soft bottom seafloor substrate map derived from an unsupervised classification of gridded backscatter and bathymetry derivatives at Tinian Island, Commonwealth of the Northern Mariana Islands (CNMI)..

    Online Links:

  2. What geographic area does the data set cover?
    West_Bounding_Coordinate: 145.57
    East_Bounding_Coordinate: 145.71
    North_Bounding_Coordinate: 15.11
    South_Bounding_Coordinate: 14.89
  3. What does it look like?
    http://www.soest.hawaii.edu/pibhmc/CNMI_images/tin-unspv-hardsoft-5m_445.jpg (JPEG, TIF)
    Hard and Soft Seafloor Substrate
  4. Does the data set describe conditions during a particular time period?
    Beginning_Date: 21-Aug-2003
    Ending_Date: 08-Jun-2007
    Currentness_Reference: ground condition
  5. What is the general form of this data set?
    Geospatial_Data_Presentation_Form: digital data
  6. How does the data set represent geographic features?
    1. How are geographic features stored in the data set?
      This is a Raster data set. It contains the following raster data types:
      • Dimensions 2920 x 4913 x 1, type Grid Cell
    2. What coordinate system is used to represent geographic features?
      Grid_Coordinate_System_Name: Universal Transverse Mercator
      Universal_Transverse_Mercator:
      UTM_Zone_Number: 55
      Transverse_Mercator:
      Scale_Factor_at_Central_Meridian: 0.9996
      Longitude_of_Central_Meridian: 147
      Latitude_of_Projection_Origin: 0
      False_Easting: 500000
      False_Northing: 0
      Planar coordinates are encoded using Row and Column
      Abscissae (x-coordinates) are specified to the nearest 5
      Ordinates (y-coordinates) are specified to the nearest 5
      Planar coordinates are specified in meters
      The horizontal datum used is D_WGS_1984.
      The ellipsoid used is WGS_1984.
      The semi-major axis of the ellipsoid used is 6378137.000000.
      The flattening of the ellipsoid used is 1/298.257224.
      Vertical_Coordinate_System_Definition:
      Depth_System_Definition:
      Depth_Datum_Name: mean lower low water
      Depth_Resolution: 0.01
      Depth_Distance_Units: meters
      Depth_Encoding_Method: Attribute Values
  7. How does the data set describe geographic features?
    Entity_and_Attribute_Overview: none
    Entity_and_Attribute_Detail_Citation: none

Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)
  2. Who also contributed to the data set?
    PIBHMC, CRED, PIFSC, NOAA, and JIMAR
  3. To whom should users address questions about the data?
    Pacific Islands Benthic Habitat Mapping Center (PIBHMC), Coral Reef Ecosystem Division (CRED), Pacific Islands Fisheries Science Center (PIFSC), National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA)
    NOAA IRC
    Honolulu, HI

    808 725-5360 (voice)
    808 725-5429 (FAX)
    nmfs.pic.credinfo@noaa.gov
    Contact_Instructions: e-mail preferred

Why was the data set created?

The hard and soft seafloor map is being used to improve sampling techniques for long-term ecosystem monitoring, to guide future ground-truthing operations and to identify coral-rich and species specific environments. This is a preliminary product and the methods used to generate the map are currently being evaluated for their accuracy.

How was the data set created?

  1. From what previous works were the data drawn?
  2. How were the data generated, processed, and modified?
    Date: 29-Sep-2008 (process 1 of 1)
    Processing steps used to generate the backscatter, bathymetry, and bathymetric rugosity grids used in the unsupervised classification process are described in their own metadata that can be found at www.soest.hawaii.edu/pibhmc. Backscatter data were resampled to 5 m grid cell size using the Raster Resample Tool in the ArcMap Version 9.2 Toolbox. Resampling of the backscatter was performed after charted data in the GeoTIFF format for the individual sonar systems were mosaicked using the ArcMap Version 9.2 Toolbox Mosaic to New Raster function. Bathymetric variance was calculated from the 5 m bathymetry in a two-step process using ArcMap Version 9.2. The first step involved calculating the standard deviation of the bathymetry layer using the Neighborhood Statistic tool from the Spatial Analyst pull-down menu in ArcMap Version 9.2. Rectangular neighborhood settings were set to a height and width of 2 grid cells to create a small-scale variance layer. The standard deviation output was then squared using the ArcMap Raster Calculater tool. A large-scale variance layer was also generated using a rectangular neighborhood height and width of 5 grid cells. The fine-scale variance is useful for defining small features that may indicate the presence of sediment ripples or possible coral-rich areas whereas the large-scale variance is useful for defining seafloor ridges, pinnacles, and significant changes in slope. Bathymetric variance proved to be a useful tool in previous efforts to map seafloor habitats by Dartnell and Gardner (2004). Their publication can be downloaded from www.soest.hawaii.edu/pibhmc/pibhmc_documentation.htm. Bathymetric rugosity was calculated using the ArcGIS Benthic Terrain Modeler (D.J. Wright et al., 2005) accessible at download at http://www.csc.noaa.gov/products/btm. The layers were then opened as ESRI GRIDS in the image processing software package ENVI (Environment for Visualizing Images) Version 4.3. Two multi-band images were then created with the backscatter, small- and large-scale variance, and rugosity. A mask was also created in ENVI for each backscatter dataset. Image classification was performed separately on the two multi-band images using the K-Means unsupervised classification method, which calculates initial class means evenly distributed in the data space and then iteratively clusters the pixels into the nearest class using a minimum distance technique. More information about K-Means algorithm can be found in the ENVI documentation available at www.ittvis.com/envi/. The number of classes was set to two and all other options were set to default. Class color mapping was performed on the resulting classified images. The substrate types of hard and soft were assigned based on results from supervised classification of the backscatter data (also performed in ENVI) using hard and soft bottom classes from classified seafloor photographs in other study sites including French Frigate Shoals, Northwestern Hawaiian Islands and Tutuila, American Samoa. Those datasets can be found at the PIBHMC website. In addition to the processing steps mentioned above, the high-intensity, track parallel, nadir signal was removed from the Reson 8101 backscatter after classification because it causes false classification results. The nadir signal was removed by creating a 15 m buffer in ArcGIS around the R/V AHI trackline navigation data sampled every second. The buffer was used to mask the Reson 8101 backscatter data and results in the trackline parallel unclassified data gaps. Methods to most accurately interpolate across the gaps are currently under investigation. Finally, the outer edge of the hard and soft map was clipped using the 125 m contour because of obvious artifacts due to the steep slope surrounding the Tinian bank.
  3. What similar or related data should the user be aware of?

How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?
    Data are collected for resource management and research purposes and are tested for internal consistency; however, no effort is made to compare these data to external references or to other published data.
  2. How accurate are the geographic locations?
    Horizontal positioning system: GPS (SPS) Horizontal position accuracy: 25 meters
  3. How accurate are the heights or depths?
    1 m Range resolution of sonar ~1.25 cm Raw sounding resolution: Variable Vertical accuracy of gridded product: 1% of water depth
  4. Where are the gaps in the data? What is missing?
    Complete
  5. How consistent are the relationships among the observations, including topology?
    These data are believed to be logically consistent though no tests were performed

How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?
Access_Constraints: None
Use_Constraints:
These data are not to be used for navigation purposes. Please acknowledge the NOAA Pacific Islands Fisheries Science Center (PIFSC) Coral Reef Ecosystem Division (CRED) and the Pacific Islands Benthic Habitat Mapping Center (PIBHMC), and the Joint Institute for Marine and Atmospheric Research (JIMAR) and School of Ocean and Earth Science and Technology (SOEST), University of Hawaii as the sources of this information.
  1. Who distributes the data set? (Distributor 1 of 1)
    Pacific Islands Benthic Habitat Mapping Center (PIBHMC), Coral Reef Ecosystem Division (CRED), Pacific Islands Fisheries Science Center (PIFSC), National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA)
    NOAA IRC
    Honolulu, HI

    808 725-5360 (voice)
    808 725-5429 (FAX)
    nmfs.pic.credinfo@noaa.gov
    Contact_Instructions: e-mail preferred
  2. What's the catalog number I need to order this data set? Downloadable Data
  3. What legal disclaimers am I supposed to read?
    These data are not to be used for navigational purposes. NOAA makes no warranty regarding these data, expressed or implied, nor does the fact of distribution constitute such a warranty. NOAA cannot assume liability for any damages caused by any errors or omissions in these data, nor as a result of the failure of these data to function on a particular system.
  4. How can I download or order the data?

Who wrote the metadata?

Dates:
Last modified: 05-Jun-2019
Last Reviewed: 01-Dec-2009
Metadata author:
Pacific Islands Benthic Habitat Mapping Center (PIBHMC), Coral Reef Ecosystem Division (CRED), Pacific Islands Fisheries Science Center (PIFSC), National Marine Fisheries Service (NMFS), National Oceanic and Atmospheric Administration (NOAA)
NOAA IRC
Honolulu, HI

808 725-5360 (voice)
808 725-5429 (FAX)
nmfs.pic.credinfo@noaa.gov
Contact_Instructions: e-mail preferred
Metadata standard:
FGDC Content Standards for Digital Geospatial Metadata (FGDC-STD-001-1998)

Generated by mp version 2.9.48 on Wed Mar 27 10:55:24 2024